Serial 1 Maintenance Schedule

Service must be performed at specified intervals to keep your eBicycle operating at peak performance.

Note: Perform maintenance more frequently in severe riding conditions such as extreme temperatures, dusty environments, rough roads, long storage conditions, short runs, or heavy stop & go traffic.
Perform spoke tension check at every 10 hours or after a hard ride over rough roads.
Regular maintenance needs to continue for the entire time the eBicycle is owned.

Minimum Service Intervals:

 

Recommended Service	Each Ride	1 Month	6 Months	12 Months
(repeated at every interval)	0 mi (0 km)	250 mi (400 km)	1500 mi (2400 km)	3000 mi  (4800 km)
Check tire pressure and tread, wheel rims for damage	X	X	X	X
Charge battery fully	X	X	X	X
Check brake functionality	X	X	X	X
Check lamp and reflector functionality	X	X	X	X
Check bell functionality	X	X	X	X
Verify handlebars and fork/front wheel turn	X	X	X	X
Check and adjust / retighten nuts, bolts, and screws and verify torque values	X	X	X	X
Check wheel spoke tightness		X	X	X
Check handlebar clamp fastener screw torque		X	X	X
Check axle nut torque		X	X	X
Inspect and lubricate kick stand and pedals		X	X	X
Inspect frame for cracks, breaks, nicks, failed welds		X	X	X
Road test to verify component and system functions		X	X	X
Inspect brake pads and discs for wear and alignment		X	X	X
Check alignment of sprocket and the belt tension			X	X
True wheels			X	X
Inspect brake system for leaks, abrasion, or stretch				X

 

Full E-bike Tune-Ups are recommended minimum every 12 months at a local bike shop or any Serial 1 dealer.

CAUTION: As with all mechanical components are subjected to wear and stresses, fatigue will occur. If the design life of a component has been exceeded, it may suddenly fail, possibly causing injury or damage. Regular servicing can help identify potential issues.